This model represents a domestic swimming pool installation, allowing users to monitor and control its filtration and water treatment systems. It defines key component types including CirculationPumpType to manage water flow, SandFilterType to monitor filter pressure and trigger backwashing, and ChlorinatorType to control chlorine production.
Chlorinator Salt-water chlorinator (electrolytic cell) or liquid-chlorine dosing unit maintaining the disinfectant level of the pool water. Control * ParameterSet.Enabled switches production on/off — it is normally driven by an external controller comparing the measured WaterQuality.FreeChlorine / WaterQuality.ORP against the target. * ParameterSet.OutputLevel scales the production rate (duty cycle of the electrolytic cell, or dosing-pump stroke rate). Safety interlock Chlorine must never be produced without water flow: gaseous products accumulating in a stagnant cell are an explosion hazard.…
Chlorinator Salt-water chlorinator (electrolytic cell) or liquid-chlorine dosing unit maintaining the disinfectant level of the pool water. Control * ParameterSet.Enabled switches production on/off — it is normally driven by an external controller comparing the measured WaterQuality.FreeChlorine / WaterQuality.ORP against the target. * ParameterSet.OutputLevel scales the production rate (duty cycle of the electrolytic cell, or dosing-pump stroke rate). Safety interlock Chlorine must never be produced without water flow: gaseous products accumulating in a stagnant cell are an explosion hazard.…